|
RCD-1000/1100 Overview
- Easy installation and put on the dashboard, just plug into the cigarette lighter.
- Support Navigation via Bluetooth for Mobile phone.
- Update database via mini USB connector on PC/NB. (Internet Connection).
- Bright LED lights for Speed Limit, GPS, POI status and Bluetooth, and adjustable audible alarms.
- Automatic system warning with audible and visual alerts to reduce your speed. Know your exact position and current speed, use the database to continue checking if you are approaching a risk area and warns you before you enter a risk area.
- Support datalog function

| GPS | |
| GPS Chipset | Sirf Star IIIGSC3f/LP |
| Frequency | L1, 1,575.42 MHz |
| Channel | - 20 parallel |
| C/A Code | - 1,023 MHz |
| Fix time (Open SKY,typical) | - Reacquisition: less than 1s - Hot start: less than 1s - Warm start: less than 35s - Cold start: less than 35s |
| Accuracy | - Position: within 10m for 90% - Velocity: 0.1m/s |
| Interface Protocol | - Output message: NMEA 0183 ver. 3.0,GGA, GSA, RMC and GSV every 1s, - Baud rate 57,600bps |
| Dynamics | |
| Altitude | 18,000 meter maximum |
| Velocity | 514 meter/second maximum |
| Internal Antenna | |
| Type | Build in Patch Antenna |
| Location Log | |
| Flash Type | 16Mb Serial Flash |
| Log data | UTC Time, Longitude, Latitude, Altitude, Velocity |
| Log Interval | 1secs ~ 60secs, user configurable (Default 15secs) |
| Device Interface | |
| Bluetooth (RCD-1100) | 2.402~2.48385 GHz Bluetooth 2.0 certified (Class 2) |
| USB 1.1 (RCD-1000) | Mini USB (5pin) for Car charger and data transfer |
| Others | |
| Dimension | Dimension: 65mm X 65mmX18.5mm |
| Weight | ≦45g |
1. RCD-1000 Device
2. USB cable
3. Car Charger
4. External antenna (optional)
5. CD (user manual, SW utility)
6. Dashboard Pad
However the road network is constantly being modified. For best results therefore,
we strongly advise you to install the SCD utility software and then register your device with us,
so that you may update the database from our web site.
To register your RCD-1000 as follows:
http://www.cricel.com/register_scdb.asp
and register on-line. After the registration you will have a username(email) and password.
Your can use the username to get the SCDB update by using SCD utility.






RCD-1000/1100 GSCD



